Fix Your Stuff Community Store

Changes to Step #2

Edit by Thomas Keulemans —

Edit approved by Thomas Keulemans

Before
After
Unchanged

Step Lines

[* black] Use an opening tool to pry under the left edge of the home button cable connector to disconnect it from its socket.
- [* icon_caution] If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.
+ [* icon_caution] If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.