Changes to Step #3
Edit by Adam O'Camb —
Edit approved by Adam O'Camb
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_note] Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely. |
| + | [* black] Flip the display assembly over. Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath. |