Fix Your Stuff Community Store

Changes to Step #4

Edit by Keegan Divine —

Edit approved by Keegan Divine

Before
After
Unchanged

Step Lines

-[* black] Using the PH2 bit, unscrew the 4 screws on the bottom of the speaker. (Circled in red)
+[* red] On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips Head #2 bit (labeled PH2 in the Pro Tech Toolkit).
[* black] Pry up at the location marked, and remove the plastic end cap
+[* black] Repeat these steps on the top of the speaker.