Fix Your Stuff Community Store

Changes to Step #4

Edit by Keegan Divine —

Edit approved by Keegan Divine

Before
After
Unchanged

Step Lines

-[* red] On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips Head #2 bit (labeled PH2 in the Pro Tech Toolkit).
+[* red] On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips Head #2 screwdriver
[* black] Pry up at the location marked, and remove the plastic end cap
[* black] Repeat these steps on the top of the speaker.