Changes to Step #5
Edit by Grey Hodge —
Edit approved by Grey Hodge
- Before
- After
- Unchanged
Step Lines
| - | [title] Remove the HDD from the caddy |
|---|---|
| + | [title] Remove the HDD from the caddy (and install the SATA SSD) |
| [* black] There are four phillips head screws, two on each side. Use the #0 driver to remove these and set them aside. | |
| [* black] At this point if you're installing a SATA SSD, slip it in the caddy, screw it in, and go backwards through the steps to button everything back up. | |
| [* black] I'm installing an M.2 SSD in mine, so I put these screws in a small plastic bag, taped them in the empty space the HDD occupied, and screwed the caddy back into place. |