Changes to Step #2
Edit by Oscar Verbeek —
Edit approved by Oscar Verbeek
- Before
- After
- Unchanged
Step Lines
| - | [* |
|---|---|
| + | [* icon_caution] Make sure the drill is not plugged in. In our case, this was easy. |
| [* black] With a Phillips size 2 screwdriver, unscrew the four 40mm screws from the front body. | |
| [* black] The front comes right off. Unfortunately this part is very rigidly put together, in fact so rigidly we were not able to disassemble it any further. |