Changes to Step #1
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| - | [* black] [guide|11677|Use an iOpener] to loosen the adhesive under the battery. |
|---|---|
| - | [* black] Work a spudger under the battery, to lift it up a bit an create a gap. |
| - | [* black] Insert a plastic card in the gap to cut the adhesive. |
| - | [* icon_caution] There are flex cables running under the battery. Don't hit them with your plastic card. |
| + | [* black] [guide|11677|Use an iOpener] to loosen the adhesive beneath the battery. |
| + | [* black] Insert a spudger between the battery and the mid frame to create a gap. |
| + | [* black] Insert a plastic card in the gap to cut the adhesive beneath the battery. |
| + | [* icon_caution] There are flex cables running under the battery. Don't damage them with your plastic card. |
| + | [* black] Remove the battery. |
| + | [* icon_note] When reassembling apply new adhesive where it is necessary. |