Changes to Step #1
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| [* black] [guide|11677|Use an iOpener] to loosen the adhesive beneath the battery. | |
| [* black] Insert a spudger between the battery and the mid frame to create a gap. | |
| [* black] Insert a plastic card in the gap to cut the adhesive beneath the battery. | |
| [* icon_caution] There are flex cables running under the battery. Don't damage them with your plastic card. | |
| - | [* black] Remove the battery. |
| - | [* icon_note] When reassembling apply new adhesive where it is necessary. |