Skip to main content

Changes to Step #8

Edit by Brett Hartt

Edit approved by Brett Hartt

Before
After
Unchanged

Step Lines

-[* black] While the bottom edge is being heated by the ***iPad opening tool***, begin releasing the adhesive from the right edge of the iPad.
+[* black] While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.
[* black] Slide the guitar pick down along the edge of the iPad, releasing the adhesive as you go.
[* icon_caution] The adhesive is very strong, and some serious force may be required. Work carefully.
[* icon_note] If you can see the tip of the guitar pick underneath the front glass, pull the guitar pick out just a little bit. While using the guitar pick this deep won't damage anything, it may get adhesive residue all over the LCD.