Changes to Step #7
Edit by Justin Ogihara —
Edit approved by Justin Ogihara
- Before
- After
- Unchanged
Step Lines
| - | [* red] Take the Spudger and gently lift the ZIF tab and remove the ribbon cable that connects the dial to the motherboard until it comes out and remove the dial. |
|---|---|
| + | [* red] Take the nylon spudger and gently lift the ZIF tab. |
| + | [* black] Disconnect the ribbon cable that connects the dial to the motherboard. |
| + | [* black] Remove the dial from the device. |