Changes to Step #6
Edit by Walter Galan —
- Before
- After
- Unchanged
Step Lines
| [* red] Remove four T10 Torx screws securing the power supply to the rear case. | |
| + | [* icon_note] The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first. |
| + | [* black] Lift the power supply out of the rear case, minding the AC-in cable that may get caught. |
| + | [* icon_caution] Do not touch the face of the power supply board to avoid electric shock. |