Fix Your Stuff Community Store

Changes to Step #1

Edit by Dominik Schnabelrauch —

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

[* black] Disconnect the display flex cable with a spudger.
-[* black] [guide|11677|Use an iOpener|new_window=true] to loosen the adhesive beneath the display. Especially take care of the upper and lower part of the display.
+[* black] [guide|11677|Use an iOpener|new_window=true] to loosen the adhesive beneath the display. Especially take care of the upper and lower part of the it.
[* icon_note] The display of the Huawei Mate 10 Pro is extremely sticky and you might want to repeat this process during the display removal several times.
-[* black] Insert a spudger into the gap in the mid frame where the charging port was located. Use the spudger to push against the display until you create a gap between the mid frame and display.
+[* black] Insert a spudger into the gap in the mid frame, where the charging port was located. Use the spudger to push against the display until you create a gap. The adhesive is really sticky so this can be a lengthy and difficult procedure. Take care not to damage any other components while doing so.
[* icon_caution] If your display isn't already broken, it is likely to break during this process. You might want to protect your hands and eyes from glas shreds.