Skip to main content

Changes to Step #1

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* icon_note] If necessary, peel back the piece of tape that secures the touchscreen ribbon cable to the logic board
-[* black] Flip up the retaining flap on both of the touchscreen ribbon cable ZIF connectors.
+[* icon_note] If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board.
+[* black] Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.