Changes to Step #4
Edit by Craig Lloyd —
Edit approved by Craig Lloyd
- Before
- After
- Unchanged
Step Lines
| [title] Remove the top and bottom screws | |
| [* black] Use a JIS 000 screwdriver to remove the following screws securing the rear panel: | |
| [* red] One 2.5 mm-long screw on the top edge of the device | |
| [* orange] Two 2.5 mm-long screws on the bottom edge of the device | |
| - | [* icon_note] If you don't have a JIS screwdriver, you can use a Phillips in a pinch. Be very careful, as a Phillips driver can easily cam out and strip the screwhead. |
| + | [* icon_note] If you don't have a JIS screwdriver, you can use a Phillips screwdriver in a pinch. Be very careful, as a Phillips driver can easily cam out and strip the screwhead. |