Fix Your Stuff Community Store

Changes to Step #4

Edit by Clay Kim —

Edit approved by Clay Kim

Before
After
Unchanged

Step Lines

[title] Remove the top and bottom screws
[* black] Use a JIS 000 driver or an official iFixit PH 000 driver to remove the following screws securing the rear panel:
[* red] One 2.5 mm-long screw on the top edge of the device
[* orange] Two 2.5 mm-long screws on the bottom edge of the device
- [* icon_note] To prevent these tight screws from [guide|13213|stripping], apply firm downward force, work slowly and try a different screwdriver if the screws won't come out.
+ [* icon_note] To prevent these tight screws from [guide|13213|stripping], apply firm downward force, work slowly and try another JIS 000 or PH 000 driver if the screws won't come out.