Changes to Step #7
Edit by Gilles de Looze —
Edit declined by Carsten Frauenheim
- Before
- After
- Unchanged
Step Lines
| [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. | |
| - | [* black] Insert an opening pick into the gap. |
| + | [* black] Insert an opening pick into the gap, make sure to insert the pick just above the rear case to not damage the screen. |
| [* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool. |