Changes to Step #1
Edit by Taylor Dixon —
Edit approved by Taylor Dixon
- Before
- After
- Unchanged
Step Lines
| - | [* black] Switch off your phone. |
|---|---|
| - | [* black] [guide|25705|Use an iOpener|new_window=true] to loosen the adhesive beneath the rear glass. Apply the iOpener for at least two minutes. You might want to repeat this step several times during the back cover removal. |
| + | [* black] Before you begin, switch off your phone. |
| + | [* black] Apply a [guide|25705|heated iOpener|new_window=true] to a long edge of the phone to loosen the adhesive beneath the rear glass. Apply the iOpener for at least two minutes. |
| + | [* icon_note] You might need to reheat and reapply the iOpener several times during to get the adhesive warm enough to cut. Follow the iOpener instructions to avoid overheating. |
| [* icon_caution] The adhesive of the Samsung Galaxy S9 is very strong. A hair dryer, heat gun, or hot plate may also be used if you aren't able to open the device with the iOpener. Be careful not to overheat the phone—the AMOLED display and internal battery are both susceptible to heat damage. |