Changes to Step #4
Edit by Marcos Arguello-Gonzalez —
Edit approved by Marcos Arguello-Gonzalez
- Before
- After
- Unchanged
Step Lines
| - | [* black] |
|---|---|
| + | [* black] Remove the J0 Phillips #0 screw which is shown in image one. This screw keeps the metal bar from sliding out. The laser lens is attached to this metal bar on one side and on the other side is the sliding motor |
| [* black] You can now slide out the rod from its placement. This will detach the laser lens and the ribbon cable from the tray. | |
| [* black] You can now replace the Ribbon cable. |