Fix Your Stuff Community Store

Changes to Step #7

Edit by Andrew Optimus Goldheart —

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

-[* icon_note] The LCD is glued to the metal LCD shield plate behind it along its top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to slide the LCD slightly left and right several times.
+[* icon_note] The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times.
[* black] Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.
[* black] Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.