Changes to Step #8
Step Lines
| [* black] Unscrew the two speed adjustment screws. Remove the springs and the screw retention clamps. | |
| - | [* icon_note] This is a simple explanation of how the speed regulator works: At the end of the motor shaft is a magnet. This |
| + | [* icon_note] This is a simple explanation of how the speed regulator works: At the end of the motor shaft is a magnet. This induces a coil on the PCB to a different degree, depending on distance. The initial distance of the magnet can be adjusted with the adjustment screws and the large control button. This regulation also keeps the speed constant under load. |