Changes to Step #3
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| [* black] Peel one of the end adhesive strips from the clear plastic backing. | |
| + | [* icon_note] The strips are cut for a specific end and are not interchangeable. |
| [* black] Hold the strip by the two green end tabs and line the adhesive strip with the phone frame. | |
| [* black] Lay the adhesive down lightly on the phone. Make sure that all cutouts are properly aligned. | |
| [* black] Once aligned, use your fingers to press the adhesive into place. | |
| [* black] Repeat the procedure for the remaining adhesive strip. |