Changes to Step #1
Edit by Matthew Kilbride —
Edit approved by Matthew Kilbride
- Before
- After
- Unchanged
Step Lines
| [* black] Close your laptop and turn it over so that the side without the HP logo is facing you. | |
| [* red] Using the TR9 screwdriver, loosen the nine screws from the base of the device. | |
| - | [* icon_note] These screws do not come out. Therefore, you should loosen all the screws and then proceed to the next step |
| + | [* icon_note] These screws do not come out. Therefore, you should loosen all the screws and then proceed to the next step. |