Changes to Step #2
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| - | [* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape], or superglue the suction cup in place and allow it to cure so you can proceed. |
|---|---|
| + | [* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed. |
| [* black] Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible. | |
| [* black] Lift the rear glass with the suction cup to create a gap between the glass and the frame. | |
| [* black] Insert an opening pick into the gap. | |
| [* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating. | |
| [* black] Slide the opening pick to the bottom right corner. |