Changes to Step #5
Edit by Tobias Isakeit —
Edit approved by Tobias Isakeit
- Before
- After
- Unchanged
Step Lines
[* black] Fairphone decided to forgo the nifty [guide|52523|display lock mechanism|stepid=115063|new_window=true] in the previous iteration and went with standard Phillips #00 screws instead. | |
[* icon_note] A tiny screwdriver is provided, which is nice, though we admit we still prefer our larger handle from the [product|IF145-299-4|Mako Driver Kit|new_window=true] for a bit more comfort. | |
[* red] With the screws gone, we unsnap the display unit from the frame to find the same pogo pin connector with its breakout board below [guide|52523|as in the previous iteration|stepid=115063|new_window=true]. | |
- | [* orange] While we are always happy to see visual instructions inside devices, we're not sure this one is of much help ''after'' we already loosened a number of screws. |
+ | [* orange] While we are always happy to see visual instructions inside devices, we're not sure this one is of much help ''after'' we already loosened a number of screws. Fairphone thought the same way and nixed this graphic in the final consumer version. |