Changes to Step #8
Edit by Claire Miesch —
Edit approved by Claire Miesch
- Before
- After
- Unchanged
Step Lines
| [* black] Not satisfied with just removing the modules, we bust out our [product|IF145-039-4|Torx T5|new_window=true] screwdriver and an opening pick and tear down even more. | |
| [* black] Starting with the top module: | |
| - | [* black] The 8 MP ƒ2.0 front camera and earpiece speaker are both removable |
| + | [* black] The 8 MP ƒ2.0 front camera and earpiece speaker are both removable. |
| [* black] The headphone jack as well as the proximity and ambient light sensors are soldered onto the breakout board. | |
| [* black] The camera module carries a modular 12 MP ƒ1.8 camera with a SONY IMX363 Exmor RS sensor. The flash LEDs are soldered onto the breakout board. | |
| [* black] The bottom module contains the vibration motor, and a soldered-on USB-C port and microphone. | |
| [* black] The loudspeaker module is the loneliest of the modules clinging onto the bottom module with its two contacts. |