Fix Your Stuff Community Store

Changes to Step #8

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Not satisfied with just removing the modules, we bust out our [product|IF145-039-4|Torx T5|new_window=true] screwdriver and an opening pick and tear down even more.
+[* black] Not satisfied with merely removing the modules, we bust out our [product|IF145-039-4|Torx T5|new_window=true] screwdriver and an opening pick and tear down even more.
[* black] Starting with the top module:
- [* black] The 8 MP ƒ2.0 front camera and earpiece speaker are both removable.
+ [* black] The 8 MP ƒ2.0 selfie camera and earpiece speaker are both removable.
[* black] The headphone jack as well as the proximity and ambient light sensors are soldered onto the breakout board.
[* black] The camera module carries a modular 12 MP ƒ1.8 camera with a SONY IMX363 Exmor RS sensor. The flash LEDs are soldered onto the breakout board.
[* black] The bottom module contains the vibration motor, and a soldered-on USB-C port and microphone.
-[* black] The loudspeaker module is the loneliest of the modules clinging onto the bottom module with its two contacts.
+[* black] The loudspeaker module is the loneliest of the bits clinging onto the bottom module with its two contacts.