Changes to Step #12
Edit by CChin —
Edit approved by Sam Omiotek
- Before
- After
- Unchanged
Step Lines
| + | [* black] IC Identification, Pt. 2: |
|---|---|
| + | [* red] Cirrus Logic [link|https://www.cirrus.com/products/cs40l25-25b/|CS40L25] Haptic Driver |
| + | [* orange] STMicroelectronics [link|https://www.st.com/content/st_com/en/products/microcontrollers-microprocessors/stm32-32-bit-arm-cortex-mcus/stm32-mainstream-mcus/stm32g0-series/stm32g0x1/stm32g071eb.html|STM32G071EB] 32-Bit ARM Cortex-M0 Microcontroller w/ 128 Kb Flash |
| + | [* yellow] Samsung S2MIS0A [link|https://www.samsung.com/global/galaxy/what-is/mst/|MST] Driver |
| + | [* green] Qorvo QM78042 Power Amplifier Module |
| + | [* light_blue] Samsung S2MPB02 Camera Power Management |
| + | [* blue] Vishay [link|https://www.vishay.com/product?docid=67786|DG2730] 2-Port USB 2.0 DPDT Analog Switch |
| + | [* violet] NXP Semiconductor [link|https://www.nxp.com/part/BGU8103#/|BGU8103] GPS/GLONASS/Galileo/COMPASS Low Noise Amplifier |
Image 1
No previous image
Added
Image 2
No previous image
Added