Changes to Step #6
Step Lines
| [title] Assemble the connector and test | |
| [* black] Screw the jacket around the plug. | |
| [* black] Screw in the end-collar to hold the jacket on the wire. | |
| - | [* black] Test by putting the two multimeter probes into the correct leads. You see in this image that red is touching the top left, and black is touching the top right. As expected we see positive 29.4 volts. This is a good test and we are done. |
| + | [* black] After reapplying power, Test by putting the two multimeter probes into the correct leads. You see in this image that red is touching the top left, and black is touching the top right. As expected we see positive 29.4 volts. This is a good test and we are done. |