Changes to Step #6
Edit by Austin Blakely —
Edit approved by Austin Blakely
- Before
- After
- Unchanged
Step Lines
| - | [* red] Remove the motor from the case and unscrew the two 8mm screws, using the T3 Torx Screwdriver, on the back of the motor. Remove the connected wires. |
|---|---|
| + | [* red] Remove the motor from the case and unscrew the two 8mm screws, using the T3 Torx Screwdriver, on the back of the motor. |
| + | [* black] Remove the connected wires. |