Skip to main content

Changes to Step #1

Edit by iRobot

Edit approved by iRobot

Before
After
Unchanged

Step Lines

[* red] There are 8 ribbon cables that need to be removed as shown in the picture.
[* icon_caution] 2 of connectors (in green) are friction fit, unlike the rest of the connectors. Remove the cable by pulling it out gently. ***Do not attempt to open or unlatch these connectors in any way.*** Doing so will break them.
-[* black] For the remaining 6 (in red), use a pair of tweezers to flip the latches up and pull the ribbon cable out.
+[* black] For the remaining 6 (in red), use a pair of [product|IF145-020|tweezers] to flip the latches up and pull the ribbon cable out.
[* black] Note that the second picture shows a broken ribbon connector next to the joystick ribbon connector (to the right of the red arrow). ***Do not*** attempt to unlatch this connector as shown in the picture!