Skip to main content

Changes to Step #2

Edit by James Reinemann

Edit approved by James Reinemann

Before
After
Unchanged

Step Lines

-[* red] Remove all seven of the 1.5mm Phillips-head screws on the black plastic housing with the PH0 Screwdriver. Once all the screws are removed lift the plastic cover away.
-[* black] Important: remove the SD card slot cover and remove the 1.5mm Phillips-head screw located in the slot.
+[* red] Remove all seven of the 1.5 mm Phillips-head screws on the black plastic housing with the PH0 Screwdriver. Once all the screws are removed lift the plastic cover away.
+[* black] Important: remove the SD card slot cover and remove the 1.5 mm Phillips-head screw located in the slot.