Changes to Step #6
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| + | [title] Loosen the ambient light sensor |
|---|---|
| + | [* black] Use tweezers to wiggle the ambient light sensor and lift it from its notch in the display. |
| + | [* icon_note] If the sensor does not wiggle free after a few seconds, apply more heat and try again. |
| + | [* icon_caution] The sensor remains attached to the rest of the sensor assembly via a very thin flex cable. Be careful not to strain or damage the cable. |
Image 1
No previous image
Added
Image 2
No previous image
Added