Changes to Step #1
Edit by Jeff Suovanen —
Edit approved by Jeff Suovanen
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use a long Phillips #2 screwdriver to remove the two screws securing the belt guard |
|---|---|
| - | [* red] One 1/4-20 x |
| - | [* orange] One 1/4-20 x |
| + | [* black] Use a long Phillips #2 screwdriver to remove the two screws securing the belt guard: |
| + | [* red] One 1/4-20 x 18 mm screw |
| + | [* orange] One 1/4-20 x 30 mm screw |