Changes to Step #22
Edit by Craig Lloyd —
Edit approved by Craig Lloyd
- Before
- After
- Unchanged
Step Lines
| [* black] Tilt the handle back up and use a 1/2" socket and socket wrench to remove the two bolts and one nut securing the handle to the floor buffer: | |
| [* red] 55.3 mm-long bolt and nut | |
| [* orange] 27.2 mm-long bolt | |
| + | [* icon_note] While the top bolt is secured with a nut, it's still threaded inside the handle tube and will need to be unscrewed. |