Changes to Step #12
Edit by koolkid —
- Before
- After
- Unchanged
Step Lines
| - | [* icon_note] REMOVE BATTERY FROM DEVICE, LIFTING UP MULTICOLORED BATTERY CABLES FROM CLIPS. |
|---|---|
| - | [* icon_note] REMOVE CIRCUIT BOARD FROM DEVICE, LIFTING UP BLACK POWER SWITCH CABLE FROM CLIPS. |
| + | [* black] Remove the battery from the device with the cables still connected. |
| + | [* black] Carefully lift up the logic board located at the base of the Zune. Unclip the orange ribbon cable in the same manner as in the previous steps. |
| + | [* black] Remove the logic board from the Zune, leaving the black wire connected. |