Changes to Step #4
Step Lines
| + | [* black] After the screws are removed, you will find that the entire base is still held down by small clips all around the laptop. |
|---|---|
| + | [* icon_note] I found it easiest to start from the front and work my way around, using a Flathead screwdriver to pry it apart from the palm rest. |
| + | [* black] The second picture shows the heatsink for the Intel GMA 3000 Graphics chip located on the opposite side of the motherboard to the touchpad. On the top of it is a sticky thermal pad that helps to distribute heat to the base. |
| + | [* red] That thermal pad on the heatsink has a double function, in that it is stuck to the base and would need a little effort to separate them from each other. |
Image 1
No previous image
Added
Image 2
No previous image
Added