Changes to Step #7
Edit by Tarun Thiruma —
Edit approved by Tarun Thiruma
- Before
- After
- Unchanged
Step Lines
| + | [* black] Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case. |
|---|---|
| + | [* icon_caution] Be sure not to yank it out, as it is soldered to the logic board. |
| + | [* black] Flip the battery over to straighten its cable and set it down. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added