Changes to Step #2
Step Lines
| [title] Remove the old adhesive | |
| [* icon_note] Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure. | |
| [* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display. | |
| - | [* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device. |
| + | [* black] Peel off the old strips of adhesive using [product|IF145-020|tweezers] or your fingers. Start at the bottom and peel ''upward'' towards the top of the device. |
| [* black] After all the old adhesive is removed, carefully clean off the adhesive residue with high-concentration isopropyl alcohol (90% or greater) and a lint-free cloth. Wipe in one direction, not back and forth. | |
| [* icon_caution] ***Don't skip this step***, or your new adhesive strips may not bond properly, and the display may fall out of your iMac. |