Changes to Step #12
Edit by René —
Edit declined by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| [title] Install the bottom adhesives | |
| [* icon_note] The next few steps will show you how to install the bottom right adhesive strip (strip 4R), which includes a notch that must be aligned with the microphone. | |
| + | [* icon_caution] The microphone is the small, middle hole of the three existing holes. It also includes the horizontal recess in the aluminum under the holes. |
| [* icon_caution] Read through this step and the next four steps before you attempt the procedure. | |
| [* black] Grasp the red pull tab on strip 4R and pull to separate about 2 inches (5 cm) of white backing from the strip. |