Changes to this Step
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| + | [title] Apply the lower adhesive strips |
|---|---|
| + | [* icon_note] The two remaining strips (4L and 4R) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement. |
| + | [* black] Grasp the red film pull tab on the 4R adhesive strip and pull to remove the backing from the strip. |
| + | [* black] Align the strip on the bottom edge of the rear enclosure such that the right end of the strip sits next to—but does not overlap—adhesive strip 3. |
| + | [* black] Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added