Fix Your Stuff Community Store

Changes to Step #23

Edit by Arthur Shi —

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[title] Remove the lower adhesive backing
[* icon_caution] Verify that your iMac is turned off and unplugged from power before you continue.
[* black] After confirming that your iMac functions properly, disconnect the display cables and carefully lean the display forward.
-[* black] Remove the film from the 4R strip by reaching in from above and pulling the tab straight up from the bottom edge of the display.
+[* black] Remove the film from the two bottom strips by reaching in from above with a pair of tweezers and pulling the blue tabs straight up from the bottom edge of the display.