Changes to Step #14
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| + | [* red] Align the adhesive strip to the bottom edge by aligning the microphone notch over the microphone hole. |
|---|---|
| + | [* orange] The microphone hole is [https://d3nevzfk7ii3be.cloudfront.net/igi/NZgoACQ4lS2VM2Gi.full|the center hole|new_window=true] flanked by two larger holes. |
| + | [* icon_note] The adhesive tears easily. Be careful not to pull on the strip with too much force. |
| + | [* black] Once you have aligned the strip, carefully set the left exposed edge onto the iMac to secure the alignment. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added