Changes to Step #14
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| - | [* red] Align the adhesive strip to the bottom edge by |
|---|---|
| + | [* red] Align the adhesive strip to the bottom edge by positioning the microphone notch over the microphone hole. |
| [* orange] The microphone hole is [https://d3nevzfk7ii3be.cloudfront.net/igi/NZgoACQ4lS2VM2Gi.full|the center hole|new_window=true] flanked by two larger holes. | |
| + | [* black] If your iMac does not have a microphone hole, align the right end of the strip such that the L-bend [https://d3nevzfk7ii3be.cloudfront.net/igi/42luQihIZrU1P3AH.full|sits next to the right vertical adhesive|new_window=true].*** The L-bend should not overlap the right vertical adhesive. *** |
| [* icon_note] The adhesive tears easily. Be careful not to pull on the strip with too much force. | |
| [* black] Once you have aligned the strip, carefully set the left exposed edge onto the iMac to secure the alignment. |