Changes to Step #22
Edit by Adam O'Camb —
Edit approved by Adam O'Camb
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove the remaining adhesive |
|---|---|
| + | [* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). |
| + | [* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it. |
| + | [* black] Repeat this step with the other adhesive strip and remove it. |
| + | [* icon_note] If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added