Fix Your Stuff Community Store

Changes to Step #2

Edit by Carsten Frauenheim —

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[title] Adhesive tip
-[* red] In the next several steps, you will heat and separate the black adhesive around the perimeter of the device.
- [* orange] Note that along the top edge of the phone, the adhesive runs significantly farther from the device's edge. You will need to insert your pick deeper here to fully seperate the adhesive.
- [* icon_note] The adhesive surrounding the rest of the device is thinner and will only require inserting the pick ~5 mm to seperate.
+[* icon_note] In the next several steps, you will heat and separate the black adhesive around the perimeter of the device.
+[* red] The adhesive surrounding the long edges of the device is thin and will only require you to insert the pick 5 mm to separate.
+[* orange] Note that along the top edge of the phone, the adhesive runs significantly farther from the device's edge. You will need to insert your pick deeper here to fully seperate the adhesive.