Fix Your Stuff Community Store

Changes to Step #2

Edit by Tiny Machines 3D —

Edit approved by Tiny Machines 3D

Before
After
Unchanged

Step Lines

[title] Disassembly 1a.
-[* black] Using a M2.5 hex and 8mm open end wrench, loosen the bottom inner wheel eccentric locknut. Back it off a few turns.
+[* icon_note] The X Axis assembly is attached to the X/Z trolleys with 4 M4 cap screws and T nuts.
+[* blue] New line.
+[* black] Remove the assembly by loosening the cap screws from the back of the machine. The T nuts just need to align parallel to the slot.
+[* black] Hold on to the X Axis assembly with one hand as it will fall onto the bed.