Fix Your Stuff Community Store

Changes to Step #2

Edit by Tiny Machines 3D —

Edit approved by Tiny Machines 3D

Before
After
Unchanged

Step Lines

[title] Disassembly 1a.
[* icon_note] The X Axis assembly is attached to the X/Z trolleys with 4 M4 cap screws and T nuts.
-[* blue] New line.
+[* blue] Unplug the X End Stop then the X Motor (this can be done before or after X Axis removal depending on your access)
[* black] Remove the assembly by loosening the cap screws from the back of the machine. The T nuts just need to align parallel to the slot.
-[* black] Hold on to the X Axis assembly with one hand as it will fall onto the bed.
+ [* icon_note] Hold on to the X Axis assembly with one hand. If not, it will fall onto the bed.
+[* black] Be sure the X Motor is unplugged