Changes to Step #2
Edit by Tiny Machines 3D —
Edit approved by Tiny Machines 3D
- Before
- After
- Unchanged
Step Lines
| [title] Disassembly 1a. | |
| [* icon_note] The X Axis assembly is attached to the X/Z trolleys with 4 M4 cap screws and T nuts. | |
| [* blue] Unplug the X End Stop then the X Motor (this can be done before or after X Axis removal depending on your access) | |
| [* black] Remove the assembly by loosening the cap screws from the back of the machine. The T nuts just need to align parallel to the slot. | |
| [* icon_note] Hold on to the X Axis assembly with one hand. If not, it will fall onto the bed. | |
| [* black] Be sure the X Motor is unplugged | |
| - | [* black] Formbot Raptor owners will only reuse the X Motor/ |
| + | [* black] Formbot Raptor owners will only reuse the X Motor/ bracket. Vivedino Raptor 2 owners will reuse the X Motor/ Bracket and X belt. |