Changes to Step #7
Edit by Tiny Machines 3D —
Edit approved by Tiny Machines 3D
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] Install the X Belt cont. |
| [* icon_note] The belt should be slightly loose at this point. | |
| [* yellow] Loosen the bolts to the X Idler assembly and while pushing it away from the frame, tighten the screws. This step can be repeated once on the machine to hold things more securely and final tension the belt. | |
| [* green] Add a second cable tie to both sides next to the others. |