Changes to Step #10
Edit by Tiny Machines 3D —
Edit approved by Tiny Machines 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Assembly |
|---|---|
| + | [* yellow] There are 4 cap screw/ t nuts securing the X Axis in place. Using an M3 hex key, you can tighten the 4 screws (inner and outer + left and right) |
| + | [* orange] You can line the right side (idler) so it is flush with the X/Z bracket. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added